1.0) F14 - DIN valve, cast iron, full bore and 2-piece body construction.

Standards: • Design EN ISO 17292 • Thickness: ISO 7121 • Leak test: BS EN 12266-1 Class A y DIN 3230.

Connections: • Flanges drilled: EN 1092 • Flanges surfaces: EN 1092. 

Lengths: Distance between flanges as per EN 558-1 [DN ≤ 100 basic serie 14, DN ≥ 125 basic serie 15.

1.1) F14D - DIN valve full bore and 2-piece body construction.

Standards: • Design: EN 1983:2006. • Thickness: EN 12516-1. • Leak test: BS EN 12266-1 Class A & DIN 3230. • FSM: BS6755 P2. • Top flange: ISO5211.

Connections: • Flanges drilled: EN 1092. • Flanges surfaces: EN 1092.

Lengths: Distance between flanges as per EN 558-1 [DN ≤ 100 basic serie 14 (Short), DN ≥ 125 basic serie 15 (Short) - Serie 1 (Long)].

2.0) F14A/F14AN - ANSI valve, full bore and 2-piece body.

Standards: • Design: ISO 17292/ASME B16.34 API 608. • Thickness: ISO 17292/ASME B16.34.• Test: EN 12266-1 /API 598. • Fire Safe Certificate: API 607/ ISO 10497. • Top mounting: ISO 5211/CAPI.

Connections: ASME B16.5.

Lenghts: ASME B16.10.

2.1) BF6KZ - ANSI valve, reduced bore and 1-piece body construction.

Standards: • Design: ISO 17292/ASME B16.34. • Thickness: ISO 17292/ASME B16.34.• Test: EN 12266. •FSM: API 607. • Top mounting: ISO 5211/CAPI.

Connections: ASME B16.5.

Lenghts: ASME B16.10.

3.0) T60S - ANSI valve, full or reduced bore and 3-piece body construction.

Standards: • Design: API 6D, ISO 14313 • Thickness: ASME B.16.34 • FSM: ISO 10497-2010 / API 607 5th. • Top flange: ISO 5211.

Connections: • Flanges:  ASME B16.5.

Lengths: API 6D, ASME B16.10.

4.0) BF6KC - Valve ANSI cryogenic, reduced bore and 1-piece body construction.

Standards: • Design: MESC. • Thickness: BS 5351. • Top mounting: ISO 5211/CAPI.

Connections: • ASME B16.5.

Lenghts: • ASME B16.10.

4.01) BF6KZ/UTAZL CRY TEMPERATURE

Design Standards: ISO 17292:2004 / API 608:2012 /   BS 5351:1986*

Flanges: ASME B16.5:1996, RF

Lengths/Face-to-face: ASME B16.10:2010

Leak test: EN 122661 Rate A / API 598

Top flange: ISO 5211:2001 and CAPI: 2002

Seats: Modified PTFE HYPATITE / Stem: Anti-static / NACE MR0175

4.02) BF6KZ/SCTAZXL LOW TEMPERATURE

Design Standards: ISO 17292:2004 / API 608:2012 /   BS 5351:1986*

Flanges: ASME B16.5:1996, RF

Lengths/Face-to-face: ASME B16.10:2010

Leak test: EN 122661 Rate A / API 598

Top flange: ISO 5211:2001 and CAPI: 2002

Seats: Modified PTFE HYPATITE / Stem: Anti-static / NACE MR0175

4.03) UTAZXLM - LOW / CRY TEMPERATURE

4.04) TDZ - LOW / CRY TEMPERATURE

5.0) SB-80 CLASS 800 // HB CLASS 800-CLASS 900-CLASS 1500-CLASS 2500. Valves with 1 piece body construction, full or reduced bo

Standards: • Design: EN 1983/B16.34 y BS EN12516 (HB Class 900) • Test: BS6755 P1 • FSM: (HB) API 607- ISO 10497.

Connections: • NPT thread: Ansi B1.20.1 • BSP thread: ISO228 • SW: Ansi B16.5 y B16.34 (HB Class 1500 -2500 • BW: SW + Nipples Sch 40-80 (Ansi B 16.25).

6.0) VU19-VU29, Floating ball valve PN40/PN63

Standards:•Design EN 1983 • Thickness: EN12516-1 • Test: EN 12266-1 Rate A / API 598.

Connections:•Butt-Welding EN 12760 • Socket Welding EN 12627 • NPT ANSI B1.20.1 o BSP ISO 228-1.

Lenghts: •Butt-Welding EN 12982-5 • Socket Welding and Threaded end /standard Kitz.

7.0) F50 BW/PE - Valve, 2-piece body construction screwed & welded.

Standards: • Design: BS5351 • Test: BS6755 P1 (BW/BW) , NT020 (PE/PE).

Connections: • BW (Ansi B16.25). • Polythylene pipe SDR-11 MDPE.

Lengths: • (BW/BW) Ansi B16.10 (2”-4” Short, 6”-8” Long).

Options: • (PE/PE) (A) Valve without ventings, (B) with 1 venting or (C) with 2 ventings. Ventings can be of 1/2" or 1", except for DN 1.1/2" and 2" for which only ventings of 1/2" can be used.

8.0) F20 - DIN or ANSI valve, 3 ways . 2-piece body constructions.

Port: • L (Deviation) or T (Transmix).

Standards: • Design: BS5351. • Flanges: DIN2501 or ANSI B16.5. • Test: DIN3230 or BS6755 P1.

Rating: • PN16 or ANSI150.

9.0) DA-SR PNEUMATIC ACTUATOR

"Scotch Yoke" pneumatic actuator, DA Double Acting execution and SR Spring Return execution. Open and closed position tolerance: ± 3º. 2.000.000 cycles guaranteed, without maintenance under normal operation conditions.

Standards: ISO 5211, DIN3337, VDE3845 y NAMUR

Working pressure: From 3 bar up to 10 bar.

Temperature range: -20ºC / +80ºC.

Control devices: Solenoid valves, Limit Switch boxes, Positioners, Manual Override, etc.

Special executions: Extra corrosion protection (TUFRAM-C22). High temperature execution (Tmax=150ºC). Low temperature execution (Tmin=-40ºC). High torque range, DA88, SR188, DA/SR-90-100 (max. 15.250 N·m at 6 bar).

9.1) K-KA, KS-KAS.PNEUMATIC ACTUATOR

"Rack & Pinion" pneumatic actuator, "K-KA" Double Acting execution and "KS-KAS" Spring Return execution. Opening or closing tolerance: +2º.

Standards: ISO 5211, DIN3337, VDE3845 y NAMUR

Working pressure: From 3 bar up to 8 bar.

Temperature range: -32ºC / +90ºC.

Control devices: Solenoid valves, Limit Switch boxes, Positioners, Manual Override, etc.

Special executions: Stainless steel pneumatic actuators (Pmax=10bar). Plastic pneumatic actuators (corrosion resistance). High temperature pneumatic actuators (Tmax=265ºC).